Multibreton DXL

Multibreton DXL

MULTIBRETON DXL is an automatic cross-cut saw for marble or granite strips, equipped with up to twelve cutting spindles. For each cutting cycle, the machine can saw a single strip or two strips simultaneously - even of different length - into items of the desired size.

The cutting cycle

multibreton-dxl-cross-cut-saw-marble
The cutting cycle is fully automated for virtually unattended operating:

1. the marble or granite strip to be cut moves forward while resting on the feeding belt which slides on the milled bench of the machine, and halts close to the pneumatic stop (if existing).

2. a movable aligner to bring the strip into square before starting the cut, is housed on the front part of the machine, opposite the spindle-holding beam.

3. the cut is performed while the spindleholding beam moves orthogonally with respect to the conveyor belt.
Once the cut is carried out, the saw blades lift before getting back to their starting position, and the strip - cut into tiles - is transferred outside the machine, while a new strip to be cut enters the machine.

The cutting spindles

multibreton-dxl-cross-cut-saw-marble
The cast-iron spindles slide along the bridge on guides in an oil bath, perfectly protected from water. The spindle positioning is automated, motorized by a screw with lead nuts connected to an electromagnetic clutch and adjusted sequentially for each single spindle.

Once each spindle has reached the programmed position, it is blocked by a hydraulic mechanism. A pneumatic device can exclude each spindle vertically. On request, the machine can be supplied in a special version with simultaneous positioning of all the spindles instead of sequential adjustment of each individual spindle.

Contact

Contact us!
If you want to be contacted, fill in the following form.
Please wait...
Level 1 documents download
File Name
Description
Size
Level
Download
DXL Multibreton 2008.pdf
Ita - Eng
4 MB
1